CE-200 Automatic Wastewater Treatment System - Hi Pressure Equipment Ltd.

Ph: 604.940.1599
Toll Free: 1.800.626.6465
Go to content


Automatic Waste Water Treatment System

Ringwood Environment, Inc. systems are designed to work best with one-step clay-based separating agents. Although our equipment can be used with traditional treatment chemicals, highest efficiency and ease of operation is achieved with a bentonite clay-based treatment program.

Clay-based flocculants can be mixed very quickly with the wastewater, producing large floc particles that won't break down under heavy agitation. Once mixing is complete, these large flocs quickly settle, allowing the clear water layer to be drawn off. Furthermore, the resulting sludge dewaters easier than the sludge produced from liquid treatment chemicals.

The result is a faster, smoother-running treatment process requiring minimal operator time.

Features & Benefits
  • Full Automation GA Series with manual overrides
  • Maximum throughput: 600 GPH
  • 200-gallon treatment tank
  • Allen-Bradley Micrologix PLC controls
  • UL approved control panel
  • 1 horsepower heavy duty agitator with jet basket
  • Treatment tank auto washdown
  • Pre-plumbed for effluent pump
  • Automatic chemical feed system with 300 lb. hopper, complete with 2000 lb. superbag support frame
  • Double rollers for greater dewatering

Equipment Measurements:
  • Length: 10'4", Width: 5'6", Height: 11'4"
  • Weight: approximately 3500 lbs.
Hi Pressure Equipment Ltd.
Unit #125-12051 Horseshoe Way,
Richmond, B.C.
V7A 4V4

Ph: 604.940.1599
Fax: 604.940.1595
Toll free: 1.800.626.6465
Back to content