GRAFFITI ERADICATOR RE-248
Residential
Graffiti Eradicator RA-248 is a high alkaline cleaner with a proprietary blend of penetrating agents that will remove the most difficult of graffiti markings from masonry surfaces.
Contains no acids, phosphates, methylene chloride, or carcinogens. Graffiti Eradicator RA-248 completely removes graffiti markings caused by aerosol latex or enamel spray paints, as well as acrylics and traffic line coatings. Penetrates to soften unsightly graffiti which may then be easily removed with a hot or cold pressure washer. Perfect for use by public works, school systems, mass transit authorities, park and rec departments, and many others.
PRODUCT HIGHLIGHTS
- Fully biodegradable.
- Corrosive Label, Non-Flammable.
- Do not use on Lexan or plastics including vinyl.
- Economical per gallon cost.
- Effective in hard or soft water.
- Do not use on aluminum or painted metal.
- Applications include: Masonry walls, floors, brick, cinder block, concrete,
APPLICATION DIRECTIONS
Apply full strength using a low pressure sprayer or brush or roller.
Allow to remain on the surface for up to 5 to 15 minutes.
Rinse off with a hot or cold pressure washer.
Always pre-test in small area.
1 gal covers up to 400 sq ft depending on porosity of the surface.
PHYSICAL DESCRIPTION
- pH 5% Solution = 11.8
- Freeze / thaw stable
- Specific Gravity = 1.17
- Active Ingredients = 31% Actives
- Hard Water = Softens and is soluble.
- Flash Point = > 212° F.
- Color = Dark Amber
- USDA Letter of Guarantee - Available
- VOC = 1 gram per liter
- Shelf Life = Two years in a sealed container.
- Softening = Exclusive anti-scale system to prevent scale coil clogging.
- Ozone & Smog = Does not carry ingredients that attack the earth’s ozone, or contribute to smog.
AVAILABLE IN
- 20 Litre Pail P/N RE-248-20
- 205 Litre Drum P/N RE-248-205
