Bolondi SW060A-CF 3000 PSI Waste Bin Cleaning Head Water Powered Self Spinning
| |
Material: | aisi 316 + bronze |
Flow: | 15 to 60lt/min 4 to 16 us gpm |
Pressure: | 200 bar / 3000 psi |
Temperature: | 90°C. - 194°F. |
Spinning speed: | fast |
Filter: | yes |
Cleaning sector: | 240° |
Nozzles: | 2 to 4 1/8 MEG |
Complete cycle: | 150 Rotations |
Complete cycle time: | 15 Sec. |
Weight: | 5.5 KG - 12.1 Lbs. |
h
SW060A-CF Video
h
Bolondi High Pressure Filter
Protect Your Bolondi Cleaning Head
Filtering is your best defence against premature cleaning head wear, and preventing downtime.
As a hot water coil goes through its heating and cooling cycles.
The coil will release small metal particles called slag.
These particles must be filtered out prior to entering the cleaning head.
These particles must be filtered out prior to entering the cleaning head.
If these particles are not filtered out.
They will get lodged into a the cleaning heads diffuser.
The turbine will stop and the cleaning head will stop rotating.
The Bolondi filter is all stainless steel construction (except Teflon O-ring).
Resists corrosion from waterborne materials.
Heavy duty screen support prevents screen collapse for maximum performance.
Maximum operating pressure is 5000 PSI
h
Scaltrol
Protect Both Your Hot Water Heater & Bolondi Cleaning Head
Scaltrol’s water scale solutions were designed to control mineral scale from water sources that cause corrosion and decrease the efficiency of your appliances and plumbing.
Without a preventative scale control solution, your appliances eventually become clogged with scale buildup – sometimes past the point of fixing.
Since most water sources are saturated with large amounts of minerals, including calcium carbonate (lime scale), calcium sulfate, iron, and manganese, the Scaltrol units are installed at the water supply.
The concentration of minerals depends on your environment, based on rock formation, pH level, oxygen content, and temperature.
Any increase or decrease in temperature can cause minerals to precipitate (i.e., form scale).
Preventing scale formation
To counteract mineral build-up, Scaltrol scale control units dispense a measured amount of polyphosphate which deposits a microscopic film to all surfaces. The mineral molecules, which have a positive charge, are then attracted to – and held in suspension by – the negative charge of the polyphosphate, which acts as a sequestrant. Since the mineral molecules are no longer able to bind together, scale cannot form.